Fault finding

Fault_finding_240x240.jpg

The challenge

One of the UK's leading packaging manufacturers had been experiencing problems with an increase in downtime, and in particular the time taken to repair machinery was slow and increasing costs.   This problem was largely a symptom of  the maintenance team's poor approach to fault finding and not to do with their technical knowledge.
 
Our client had previously used Festo in the past for standard technology based training courses, but in this case felt the downtime issue needed to be directly addressed with a bespoke 'Fault finding' course.

The solution

Festo's Didactic's Graham Spencer, Senior Instructor, organised a  two day off site locally held course, so that the maintenance team could avoid being interrupted unless absolutely essential.

In order to provide all the maintenance team with a common structured systematic approach, Graham devised a 5 step process in order to speed up repair time and ensure that the team thought carefully about the cause and root causes were before acting to repair the fault itself.

Step 1  - Secure the scene

Step 2 - Collect the evidence - Understand the problem

Step 3 - Identify the potential suspects diagnose the fault

Step 4 -  Arrest and detain - Select the most likely candidate for more investigation

Step  5 - Take to trial - Test for fault


Client benefits

With the new five step process in place, the client has immediately benefited from a decrease in downtime, along with costs.  Furthermore, the team now have a improved and harmonised reporting procedure leading to increased awareness and understanding of the fault finding processes and a quicker repair process.

Customer quotes

"Good practical rigs to fault find on and improve skills."

"It will make you stop and think, before just acting on instinct."

"Well worth it!"

Enquiries & Booking
01604 667068